FAQ

 Home /FAQ

Q1:What are the JQJ waterproof  zipper use for?

A1:

1)Cover:navigation engine, electropult, weapon ammo, exploder, and chemical, missile, airplane, important instrument and container.
2)Protection:space suit, driving suit, life jacket, fishery suit, protective clothing, decompression clothing, radiation protective clothing.
3)Others:air lock room, water walking ball, tent, life raft, survival instrument, shipping instrument, hovercraft, water bed and so on.

 

 

Q2:How to fit the JQJ waterproof zipper?

A2:

1The zipper shall be fixed after laying off products. During the fixing, two belts shall be straight.

2When fixing the zipper, gumwater cannot be smeared on inner rack rail or outer rack rail. Otherwise, the gasproof of airtight zipper will be broken or the zipper will be damaged for it is astringent when zipping it. If gumwater is smeared on the zipper immodestly, use a soft cloth with thinner to clean off the gumwater.


Q3:How to correct to use the JQJ waterproof zipper?

A3:

1Before using the zipper, please use clean water or brush to clean off the dust or bedload attaching on two sides of the zipper, because these adhesive materials will influence gasproof of the zipper and even damage the zipper.

2When zipping the zipper, you must zip the pull head along the rack rail. If you zip it slanting, the rack rails will not in anastomosis with each other, then the gasproof will be reduced, and the zipper may even be damaged.

3Zipping velocity shall be controlled within 10-15m/min. Don’t zip it again and again for a long time, in order to avoid the pull head being euthermic which will lead it to be astringent or be damaged.

4If clothes or cloth lock the zipper, you should zip the pull head back a little, and remove the things, then zip it slowing. Be sure to keep in mind that don’t pull it rudely, or the zipper will be damaged.

5If the zipper is fixed on the back or the flank of the clothes, you must zip it with other’s assistance.

6After using the zipper, you shall use clean water or brush to clean off the dust or bedload attaching on two sides of the zipper, then open the zipper, and clean the inside. Try your best to avoid feculency entering inner rack rail, which will reduce gasproof or damage the zipper.

7After using and cleaning the zipper, you shall smear the beeswax on outer rack rail, and zip it back and forth for several times to ensure that the zipper is lubricative next time. But the beeswax only can be smeared on outer rack rail, if you smear it on inner rack rail, the gasproof will be reduced.

8If airtight zipper you need is more than four meters, we advise you adopt double pull head to avoid superfluous abrasion.


Q4:How to correct to keep the JQJ waterproof zipper?

A4:

1For the airtight zipper in store, you shall keep it be open in shady and cool area.

2For the airtight zipper is stored for a long time, you should keep it in a close case far away from ventilated area to avoid the rock rail being oxidized and changing color.

3After fixing airtight zipper on the clothes or other products, under non-working state, you shall keep the zipper be open with wax in shady and cool area.

4When packing the clothes, you can roll up the clothes along the end of zipper and leave the zipper facing outside, and then encase the clothes. When rolling up the clothes, the zipper cannot be folded, and the outside of wrappage cannot be pressed by other things.

5If there is no packing, you can hang the clothes well and keep it be open. When hanging the clothes, you shall try your best to reduce tensile force of rock rail to avoid deformation of the zipper.